
摘要:在光催化析氢过程中,有效分离体相与表面电荷对于提升材料光催化性能至关重要。本研究通过溶剂热和煅烧分别制备了孪晶Mn0.5Cd0.5S固溶体(T-MCS)和中空NiCo2O4(H-NCO),之后通过溶剂热蒸发将两者均匀混合形成T-MCS/H-NCO,实现高效光催化析氢。T-MCS晶体结构是由闪锌矿型Mn0.5Cd0.5S(ZB-MCS)和纤锌矿相Mn0.5Cd0.5S(WZ-MCS)的交替排列组成。双晶结构的形成促进了MCS体相内的电荷迁移和分离,并遵循S型结传输路径。此外,与H-NCO的耦合不仅可以减少T-MCS纳米颗粒的聚集,而且由于其较低的析氢过电位,有助于析氢反应。最后,在同质结异质结以及核壳结构的协同作用下,T-MCS/H-NCO的产氢速率达到35.84 mmol·g-1·h-1,约为T-MCS(12.09
mmol·g-1·h-1)的三倍。
关键词:光催化析氢;孪晶Mn0.5Cd0.5S;中空NiCo2O4;同质异质结;核壳结构
Abstract: In the photocatalytic hydrogen evolution process, the effective separation of bulk and surface charges is crucial for enhancing the photocatalytic performance of materials. In this study, twinned Mn0.5Cd0.5S solid solution (T-MCS) and hollow NiCo2O4 (H-NCO) were prepared through solvothermal and calcination methods, respectively. Subsequently, the two were uniformly mixed via solvothermal evaporation to form T-MCS/H-NCO, achieving efficient photocatalytic hydrogen evolution. The crystal structure of T-MCS consists of alternating arrangements of zinc blende-type Mn0.5Cd0.5S (ZB-MCS) and wurtzite-phase Mn0.5Cd0.5S (WZ-MCS). The formation of the twin crystal structure promotes charge migration and separation within the MCS bulk and follows an S-type junction transport pathway. In addition, coupling with H-NCO not only reduces the aggregation of T-MCS nanoparticles but also facilitates the hydrogen evolution reaction due to its lower hydrogen evolution overpotential. Finally, under the synergistic effect of homo-heterojunction, and core-shell structures, the hydrogen production rate of T-MCS/H-NCO reaches 35.84 mmol·g-1·h-1, approximately three times that of T-MCS (12.09 mmol·g-1·h-1).
Key words:
photocatalytic hydrogen evolution; twinned Mn0.5Cd0.5S;hollow
NiCo2O4; homo-heterojunction; core-shell structures
订阅方式:
①在线订阅(推荐):www.sdchem.net.cn
②邮局订阅:邮发代号24-109
投稿方式:
①在线投稿(推荐):www.sdchem.net.cn
作者只需要简单注册获得用户名和密码后,就可随时进行投稿、查稿,全程跟踪稿件的发表过程,使您的论文发表更加方便、快捷、透明、高效。
②邮箱投稿:sdhgtg@163.com sdhg@sdchem.net
若“在线投稿”不成功,可使用邮箱投稿,投稿邮件主题:第一作者名字/稿件题目。
投稿时请注意以下事项:
①文前应有中英文“题目”、“作者姓名”、“单位”、“邮编”、“摘要”、“关键词”;
②作者简介包括:姓名、出生年、性别、民族、籍贯或出生地、工作单位、职务或职称、学位、研究方向;
③论文末应附“参考文献”,执行国标GB/T7714-2005标准,“参考文献”序号应与论文中出现的顺序相符;
④注明作者的联系方式,包括电话、E-mail、详细的通讯地址、邮编,以便联系并邮寄杂志。
欢迎投稿 答复快捷 发表迅速
