
摘要:电子器件向高集成微型化发展,散热问题凸显,热界面材料(TIMs)可填充界面空隙、降低热阻,是热管理关键材料。导热硅橡胶在电子散热领域作用突出,兼具优异导热性能与良好加工工艺性。本研究探究含氢硅油调控对导热硅橡胶表面黏性的影响,同时兼顾材料力学、导热及加工性能。含氢硅油种类与用量变化会改变导热硅橡胶的离型力,而离型力直接决定材料表面黏性,进而影响垫片的装配便利性与界面贴合效果,对导热硅胶片的实际应用十分关键。结果表明:在固定粉油比4.8与邵氏C硬度 20-22 的条件下,随着端含氢硅油用量提升、侧含氢硅油用量降低,导热硅橡胶垫片表面黏性(以铜基材为例,离型力由0.45增至0.82 N)、断裂伸长率(72%增至115%)增大,交联密度(14.3×10-4降至6.8×10-4 mol/cm³)降低,压缩率(41%-46%)、导热系数(接近2 W/m·K)基本维持稳定,渗油得到抑制,热失重程度降低。若使导热硅橡胶垫片兼具适宜的表面黏性与优异综合性能,配方中端含氢硅油用量宜控制在 6 phr 附近。综上,该研究为导热硅橡胶表面黏性的优化调控提供相关理论支撑与实验依据,有利于拓展有机硅基热界面材料(TIMs)的应用场景。
关键词:导热硅橡胶;含氢硅油;表面黏性;交联密度;综合性能
Abstract: With the trend toward high integration and miniaturization of electronic devices, heat dissipation has become a prominent challenge. Thermal interface materials (TIMs), which fill interfacial gaps and reduce thermal resistance, serve as critical materials for thermal management. Thermally conductive silicone rubber stands out in electronic heat dissipation owing to its favorable thermal conductivity and good processability. This study investigates the effect of hydrogen-containing silicone oil regulation on the surface tack of thermally conductive silicone rubber, while balancing its mechanical, thermal and processing properties. The type and dosage of hydrogen-containing silicone oil alter the release force of thermally conductive silicone rubber. Release force directly governs surface tack, further affecting the assembly convenience and interfacial contact performance of thermal pads, which is essential for the practical application of thermally conductive silicone sheets. The results show that under a fixed filler-oil ratio 4.8 and Shore C hardness of 20-22, increasing the dosage of terminal hydrogen-containing silicone oil and decreasing the dosage of pendant hydrogen-containing silicone oil raise the surface tack (tested on copper substrate, release force increases from 0.45 to 0.82 N) and elongation at break ( 72% to 115%), while reducing crosslink density (from 14.3×10-4 to 6.8×10-4 mol/cm³). The compression ratio (41%-46%) and thermal conductivity (nearly 2 W/m·K) remain nearly constant. Oil bleeding is suppressed and thermal mass loss is reduced. To achieve thermally conductive silicone rubber pads with moderate surface tack and superior comprehensive properties, the dosage of terminal hydrogen-containing silicone oil in the formulation should be controlled at approximately 6 phr. In summary, this work provides theoretical support and experimental basis for the optimization and regulation of surface tack of thermally conductive silicone rubber, facilitating the expansion of application scenarios for silicone-based TIMs.
Keywords: thermally conductive silicone rubber; hydrogen-containing silicone oil; surface tack; crosslinking density; comprehensive properties
订阅方式:
①在线订阅(推荐):www.sdchem.net.cn
②邮局订阅:邮发代号24-109
投稿方式:
①在线投稿(推荐):www.sdchem.net.cn
作者只需要简单注册获得用户名和密码后,就可随时进行投稿、查稿,全程跟踪稿件的发表过程,使您的论文发表更加方便、快捷、透明、高效。
②邮箱投稿:sdhgtg@163.com sdhg@sdchem.net
若“在线投稿”不成功,可使用邮箱投稿,投稿邮件主题:第一作者名字/稿件题目。
投稿时请注意以下事项:
①文前应有中英文“题目”、“作者姓名”、“单位”、“邮编”、“摘要”、“关键词”;
②作者简介包括:姓名、出生年、性别、民族、籍贯或出生地、工作单位、职务或职称、学位、研究方向;
③论文末应附“参考文献”,执行国标GB/T7714-2005标准,“参考文献”序号应与论文中出现的顺序相符;
④注明作者的联系方式,包括电话、E-mail、详细的通讯地址、邮编,以便联系并邮寄杂志。
欢迎投稿 答复快捷 发表迅速
